Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Modern flush
LiftMaster openers
Before
After
Before
After
Before
AfterSpring Repair in Sandy Springs, GA
Garage door spring repair in Sandy Springs typically costs between $200 and $450, depending on the specific spring type, the wire diameter, and the door weight. We handle these repairs on the same day you call us at (470) 944-6743, ensuring your door is operational again without unnecessary delays. At Servo Garage Doors, we operate under The Haven Standard, which means we provide a written price and a clear scope of work before we touch a single component. If your garage door won’t lift, makes a loud bang, or hangs unevenly, you likely have a broken spring.
Garage door springs are high-tension components that act as the true engine of your door. When a spring snaps, the garage door opener cannot lift the weight of the door, and attempting to operate it can damage the motor, require Cable Repair, or warp the door panels themselves. Because we are an independently owned and operated business, we prioritize safety and documentation above all else. We provide a documented photo record of the failed component, so you see exactly what we see before we start any work. This is Clause 4 of The Haven Standard, and it ensures total transparency for every homeowner in Sandy Springs.
If you are experiencing issues with your garage door, we encourage you to look at our Garage Door Repair in Sandy Springs page for a broader overview of our services. For the immediate task of spring replacement, our team is ready to assist. You can also view our home page to understand the full scope of our commitment to quality service in the metro area.
When You Need Spring Repair
Garage door springs in Sandy Springs often succumb to metal fatigue due to our local climate, which involves significant temperature swings throughout the year. These fluctuations cause the metal to expand and contract, eventually leading to a clean break at the coil. Recognizing the signs early can prevent damage to your opener or injury to those nearby. If you notice any of the following, call us at (470) 944-6743.
- The Loud Bang: This is the most common indicator. A torsion spring under high tension snapping sounds like a firecracker or a gunshot inside your garage. If you heard a loud noise and now the door won’t move, assume the spring has failed.
- The Door Won’t Open: If your garage door opener engages but the door only lifts a few inches before stopping, the opener’s safety sensors are detecting that the door is too heavy to lift. Do not force the opener, as this can strip the gears inside the motor.
- Uneven Movement: If the door hangs crooked or shifts to one side while moving, one spring may have failed while the other is still holding the tension. This puts immense stress on the cables and the horizontal tracks.
- Visible Gap in the Spring: If you look at the shaft above your garage door, you will see the torsion spring. A broken spring will have a distinct, visible gap of about an inch or two where the coil has snapped.
- Door Feels Heavy: If you pull the emergency release cord and manually lift the door, it should feel relatively light, roughly 10 to 20 pounds. If it feels extremely heavy or won’t stay open, the springs are not providing the necessary counterbalance.
Safety Warning: Garage door springs are under extreme tension. They are designed to hold the weight of a door that can exceed 300 pounds. Never attempt to adjust, remove, or replace a spring yourself. The risk of serious injury from a snapping spring or a falling door is high. Always rely on a trained professional who uses the correct winding bars and safety procedures.
Our Spring Repair Process
We follow a strict, evidence-based process for every service call. We do not guess, and we do not provide “over the phone” pricing that changes once we arrive. We believe in the written word, as dictated by Clause 1 of The Haven Standard. When you choose us for your spring repair in Sandy Springs, this is what you can expect.
- Assessment and Documentation: Upon arrival, our technician inspects the spring system. We measure the wire diameter, the inner diameter of the coil, and the length of the spring to ensure we provide the exact replacement needed. Per Clause 4, we photograph the failed spring and the door hardware, documenting the condition for your records.
- Written Price and Scope: Before we begin any work, we provide a flat, written price. This price includes the parts, the labor, and the safety inspection. You will know exactly what you are paying before we pick up a tool.
- Removal of Failed Components: We use specialized winding bars to safely release the remaining tension from the broken spring. We remove the old hardware carefully to ensure no damage occurs to the torsion tube or the center bearing plate.
- Installation and Calibration: We install the new, high-cycle springs. We then wind the springs to the exact tension required for your specific door weight. This ensures the door is perfectly balanced, which extends the life of your garage door opener.
- Safety Test and Verification: After the new springs are installed, we perform a balance test. We disconnect the opener and manually lift the door to ensure it stays in place at various heights. We then reconnect the opener and test the limit switches and safety reverse sensors to ensure everything operates smoothly.
- Final Documentation: We provide you with a written warranty and the final photo record of the completed work. This ensures you have a paper trail for the service performed.
BeforeAfterSpring Repair Pricing in Sandy Springs
We believe in upfront pricing. We do not hide behind “call for a quote” tactics. The cost of spring repair depends primarily on the door weight and the cycle rating of the spring. A standard 10,000-cycle spring is the industry baseline, but we often recommend higher-cycle springs for homes in Sandy Springs where the garage door is used as the primary entrance.
The following table provides a general range for our services. Please note that these are estimates for professional replacement, including parts and labor.
| Service Type | Estimated Price Range |
|---|---|
| Single Torsion Spring Replacement | $200 - $325 |
| Double Torsion Spring Replacement (Both Springs) | $300 - $450 |
| Extension Spring System Replacement | $250 - $400 |
| High-Cycle Spring Upgrade (Add-on) | +$50 - $100 |
If you have a written estimate from another company, we offer a Free Second Opinion. We will review their paperwork and give you our honest assessment of what is actually required. You do not need a coupon or a special code for this; it is simply part of our commitment to being your honest choice for Garage Door Repair.
FAQs - Spring Repair
Can I fix my garage door spring myself?
No, you should never attempt to repair or replace garage door springs yourself. These springs are wound under extreme tension, and a single mistake can cause them to release that energy violently, leading to severe injury or death. Professionals use specialized tools and safety equipment to manage this tension safely. Please call (470) 944-6743 to have a trained technician handle the replacement for you.
How do I know if I have torsion or extension springs?
Torsion springs are mounted on a metal shaft directly above the garage door opening and are usually wound around the shaft. Extension springs are located on the sides of the door, running parallel to the horizontal tracks that may occasionally need Track Realignment. Most modern, heavier doors use torsion springs because they provide a smoother, more balanced lift. If you are unsure, our technician will identify your system immediately upon arrival and explain the replacement requirements.
Do you service my specific garage door brand?
Yes, we service all major brands including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. The springs we use are matched to the weight and specifications of your door, regardless of the brand of the opener or the door panels themselves. We ensure the spring rate is correct for your specific installation.
Why do you require a written price before starting?
We operate under Clause 1 of The Haven Standard, which mandates that we provide a written price and scope of work before any work begins. This eliminates surprises and ensures that you, the homeowner, remain in control of the project. We believe the customer should always know exactly what they are paying for before a technician touches the equipment.
If you have a broken spring or suspect one is failing, do not wait for the door to stop working entirely or damage your opener motor. We are available 24 hours a day, 7 days a week to answer your call. Contact us at (470) 944-6743 for a free estimate and to schedule your service with a technician who values transparency and precision.
Written by Marcus Deller, Owner at Servo Garage Doors Sandy Springs, serving Sandy Springs.